The Flag Guy® Recommends “The Moose” Bracket

1″ Diameter – Approx. 30° Angle

This heavy-duty stainless steel bracket takes a 1″ diameter pole and is supplied with stainless steel wood screws and a stainless steel thumb screw. The bracket is set at an approximate 30-degree upward angle for proper flag display.

The following description was written by our previous owner, Al, and we’ve kept it because it perfectly captures his enthusiasm for quality flag hardware:

Ok. Call me a flag geek. But I just get all excited about flag hardware. This is the king of flag holders.

I had been ignoring the stainless steel flag bracket shown at left for quite some time. After all, we’d had the smaller #WB26 stainless steel bracket shown below left for years and it is real good. When it came out it was the first stainless steel bracket we had ever seen and it was wonderful to have it. It truly fills an important niche. So I figure, what could be better about the stainless steel bracket shown at left that it costs more. But finally curiosity got the better of me and I bought one just to see it.

Now I know…

First of all, it is massive. In almost 25 years in this industry, I have not seen a larger 1″ bracket.

Second of all, if you want to attach it to a telephone pole or lighting pole, the slot for a strap (not included) is closed, making it more effective.

Third of all, if you need a more solid anchorage, there are FOUR holes for screws which will give you 25% more bite into your surface.

Fourth of all, it comes in a beautiful mirror finish.

Fifth of all, take a look at the thumb screw: You do NOT need a Phillips head screwdriver to tighten it down.

It’s flagpole hardware like it ought to be. Flagpole brackets don’t have to be wimpy. This is my favorite stainless steel flag holder and is the best among strong flag brackets.

For those of you who wonder about the EXACT  size: Footprint is about 2.75x 3 1/8″ overall size. The holes are about 2 1/8″ on center left to right, and about 1.75″ on center top to bottom. the barrel is about 3.5″ deep. The screw holes are 7/32″. The screw size we supply is a 10×1.5″ wood screw.